View V23833-F0005-B101_389048.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

10 Gigabit XFP
Serial Hot-Pluggable Tr a n s c e i v e r
The Infineon
10G XFP transceiver series is a family of
high-performance, low-cost modules for serial optical data communication applications. The modules are protocol-agnostic, ultra-small 10 Gbit/s optical transceivers that comply with all applicable IEEE 802.3ae 10 Gigabit Ethernet and NCITS 10 Gigabit Fibre Channel standards. Infineon's small-form-factor 10 Gigabit XFP transceivers are fully compliant with the specifications of the XFP MSA (Multi-Source Agreement). The XFP series includes an 850 nm wavelength version for short-reach applications of up to 300 m and a 1310 nm version for applications of up to 10 km in range. Infineon's XFP modules allow communications equipment manufacturers to create standard-based, high-bandwidth systems to meet the requirements of 10GE, 10GFC and OC-192 applications, including server network interface cards, host bus adapters, target channel adapters and SAN and enterprise LAN switches. The modules are designed for high-density applications. Configurations of up to 16 modules in a 19-inch rack space are possible without compromising the stringent thermal and EMI management requirements with 10 Gbit/s optical electronics devices.
Features
Full-duplex transmission at 9.95 to 11.08 Gbit/s Transceiver options: 850 nm VCSEL for a range up to 300 m over multi-mode fiber 1310 nm DFB laser for up to 10 km over single-mode fiber Protocol-transparent 2-wire interface for integrated Digital Optical Monitoring Serial 10 Gbit/s XFI electrical interface User-friendly plug-and-play-style "Hot Swap" Power consumption less than 2.5 W 5 V, 3.3 V and 1.8 V power supply
Applications
Fibre Channel SAN switches Ethernet LAN switches Fibre Channel host bus adapters Ethernet network interface cards Hubs, bridges, routers SONET/SDH/ATM switches
Integrated transmit and receive CDR IEC 60825-1 class 1 and FDA 21 CFR 1040.10 and 1040.11 laser eye safety ESD class 2 per MIL-STD 883D method 3015.7 FCC 47 CFR class B
www.infineon.com/fiberoptics
Never stop thinking.
Products Ordering code
V23833-F0005-B101 V23833-F0105-B001
Wave length
850 nm 1310 nm
Reach
300 m* 10 km
Optical connect
LC LC
* Using 50 m multi-mode fiber with 2000 MHz*km bandwidth
Accessories Ordering code
V23833-F9909-Z001
Product
XFP evaluation board kit
Description
Test board with 30-Pin XFP connector and cage
a
XFP transceiver mechanical package [mm]
XFP transceiver block diagram
Vcc
Hot swap control
Tx Rx timer ASIC SerDes/PHY
XFI 9.95-11.08 Gbit/s
Laser driver
10 G laser 9.95-11.08 Gbit/s
Rx CDR
2 wire interface Control & data management PIN + TIA/LA
30-pin edge connector
For more information, please contact: Infineon Technologies
North America (CA): Irene Yan Phone: +1-408-501-5664 irene.yan@infineon.com Europe (Germany): Angela Scholl Phone: +49-30-386-22521 angela.scholl@infineon.com Asia (Hong Kong): Owen Chui Phone: +852-2832-048 owen.chui@infineon.com Japan (Tokyo): Kunikazu Watanabe Phone: +81-3-5449-6705 kunikazu.watanabe@infineon.com
Edition September 2003 Published by Infineon Technologies AG, St.-Martin-Strae 53, D-81669 Munchen (c) Infineon Technologies AG 2003. All Rights Reserved.
Please note: The information herein describes certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices, please contact your nearest Infineon Technologies office in Germany or our Infineon Technologies representatives worldwide (www.infineon.com).
Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Infineon Technologies components may only be used in life-support devices or systems with the express written approval of Infineon Technologies if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life-support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Z&P 2002921
Order no. B159-H8165-G1-X-7600 Printed in Germany PS 09032.

▲Up To Search▲

Price & Availability of V23833-F0005-B101

	To Download V23833-F0005-B101 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .